AII Palm O2D Handheld O2 Analyzer
RM 0.00
Description
Handheld O2 Analyzer – Palm O2D
For Oxygen Measurement in Welding and Scuba Diving
AII Palm O2D Handheld O2 Analyzer is a handheld nitrox analyzer that provide a very easy way to verify oxygen levels prior to welding or in scuba diving tanks.
Analytical Industries’ AII Palm O2 is a small, lightweight pro nitrox analyzer. These cost-effective, highly accurate oxygen analyzers are designed to measure and display the concentration of oxygen in compressed breathing air tanks intended for scuba diving, for personnel safety, O2 deficiency in confined spaces as well as confirming the O2 levels prior to welding.
These O2 analyzers use similar electrochemical galvanic fuel cell oxygen sensors that are extensively used to measure concentrations from 0% to 100% O2 in gas streams.
AII Palm O2D Handheld O2 Analyzer Features:
-
- Easy user interface, one touch controls
- Tried and tested nitrox analyzer
- One touch calibration, 100% O2 or air
- Long battery life, 13,000 hrs of use
- Quick and simple to use with accurate reliable results
- State of the art electronics
Accessories also available:
- 1-8 Tube to Sensor BC Restrictor 1 LPM
- Dome to Sensor Adaptor
- Blue Tee Adapter 15mm x 22mm
- Flow Diverter 15 mm 2 O-Ring
- Dovetail Pole Shelf Clamp Female
- Mounting Bracket
- Cable Coiled w/ Phono Jack (Exterior Sensor- Remote Style)
Palm 02D Adapter, Dome to Sensor |
Adapter, 1/8 Tube to Dome |
Mounting Bracket Palm O2 D (P/N: HRWR-1185) |
Mounting Bracket AII-2000/ 3000 Series, Palm O2 D (P/N: A-3657) |
| Palm O2 | |
| Measurement range | 0-100% oxygen |
| Accuracy | < ±2% of FS range under constant conditions |
| Response time | T90 < 10 seconds |
| Sensitivity (LDL) | 0.50% |
| Linearity | ±1% under constant conditions |
| Sensor model | AII-11-75-PO2 AII-11-75-PO2-D (for diving) |
| Sensor life at 25°C (77°F) and 1 atmosphere | 32 months in air 5°C (77°F) and 1 atmosphere |
| Calibration interval | Prior to use and after 8 hours operation |
| Inlet pressure | Ambient or 0.34-2 barg (5-30 psig) for flow through connector |
| Flow rate (constant) | 0.2-10 Nl/min (0.4-20 SCFH) |
| Gas connections | 1×16 mm thread 1/4″ tube for remote sensors See accessories for additional connectors |
| Display | 3 digit LCD 2.8 x 1.6cm (1.1 x 0.625″); resolution 0.1 |
| Dimensions | 6.9 x 10.4 x 3.4cm (2.72″ x 4.1″ x 1.35″) |
| Weight | 196g (7oz) |
| Compensation | Temperature compensated |
| Alarms | User adjustable HI and LO alarms (AII-3000 M and MHC only) |
| Storage temperature | -20°C to +60°C (-4°F to 140°F) on intermittent basis |
| Operating temperature | 6 to 45°C (41°F to 113°F) |
| Power | 2 AA alkaline batteries |
| Battery Life | Up to 1300 hrs |
| Humidity | Non-condensing 0-95% RH |
| Warm up time | None |
| Approvals | None |
Additional information
| Weight | 1 kg |
|---|---|
| Model | Palm O2, Adapter Dome to Sensor, Adapter 1/8 Tube to Dome, Mounting Bracket HRWR-1185, Mounting Bracket A-3657 |
