AII – Handheld O2 Monitors – AII-3000 and Palm O2

RM 0.00

Clear

Description

Handheld O2 Monitors – AII-3000 and Palm O2

For Oxygen Measurement in Welding and Scuba Diving

The Palm O2, Palm CO and AII-300 are handheld oxygen analyzers that provide a very easy way to verify oxygen levels prior to welding or in scuba diving tanks.

Analytical Industries’ AII-3000 series or Palm O2 are a convenient way to check oxygen levels in welding gases. These cost-effective gas analyzers also measure and display the concentration of oxygen in compressed breathing air tanks intended for scuba diving, for personnel safety, O2 deficiency in confined spaces, as well as confirming the O2 levels prior to welding. These monitors use similar electrochemical galvanic fuel cell oxygen sensor that are extensively used to measure concentrations from 0% to 100% O2 in gas streams.

 

Features

  • 0 to 100% O2 measurement range
  • 0 to 25ppm CO
  • Long sensor life up to 60 months (AII-3000)
  • Battery life up to 13,000 hours of
  • continuous use (Palm O2)
  • Integrated or remote sensors
  • Fast response time of T90 in <10 seconds

 

AII-3000 Palm O2 Palm CO Analyzer
Measurement range 0-100% oxygen 0-100% oxygen 0-25 ppm CO
Accuracy < ±2% of FS range under constant conditions < ±2% of FS range under constant conditions < ±2 ppm under constant conditions
Response time T90 < 10 seconds T90 < 10 seconds T90 < 30 seconds
Sensitivity (LDL) 0.50% 0.50% 0.5 ppm CO
Linearity ±1% under constant conditions ±1% under constant conditions ±1% under constant conditions
Sensor model AII-11-60 (remote sensor)
AII-11-60-HC
AII-11-75-PO2
AII-11-75-PO2-D (for diving)
OSV-22-AF
Sensor life at 25°C (77°F) and 1 atmosphere 60 months in air 5°C (77°F) and 1 atmosphere 32 months in air 5°C (77°F) and 1 atmosphere 24 months in air 5°C (77°F) at 1 atmosphere
Calibration interval Prior to use and after 8 hours operation Prior to use and after 8 hours operation Certified span gas mixture of CO concentrations between 10-20 ppm with balance air.
Inlet pressure Ambient or 0.34-2 barg (5-30 psig) for flow through connector Ambient or 0.34-2 barg (5-30 psig) for flow through connector 800 1200 mbara (11.6-17.4 psig)
Flow rate (constant) 0.2-10 Nl/min (0.4-20 SCFH) 0.2-10 Nl/min (0.4-20 SCFH) 0.2-10 Nl/min (0.4-20 SCFH)
Gas connections 1×16 mm thread
1/4″ tube for remote sensors
See accessories for additional connectors
1×16 mm thread
1/4″ tube for remote sensors
See accessories for additional connectors
Supplied with Dome adapter (A-3388) with optional BC adapter (A-3671)
Display 3½ digit backlit LCD 7 x 3.5cm (2.75 x 1.375″); resolution 0.1 3 digit LCD 2.8 x 1.6cm (1.1 x 0.625″); resolution 0.1 2 digit LCD 2.8 x 1.6cm (1.1 x 0.625″); resolution 1 ppm CO
Dimensions 9.1 x 14.9 x 4cm (3.6 x 5.9 x 1.6″) 6.9 x 10.4 x 3.4cm (2.72″ x 4.1″ x 1.35″) 6.9 x 10.4 x 3.4cm (2.72″ x 4.1″ x 1.35″)
Weight 280g (10oz) 196g (7oz) 196g (7oz)
Compensation Temperature compensated Temperature compensated N/A
Alarms User adjustable HI and LO alarms (AII-3000 M and MHC only) User adjustable HI and LO alarms (AII-3000 M and MHC only) User adjustable HI and LO alarms (AII-3000 M and MHC only)
Storage temperature -20°C to +60°C (-4°F to 140°F) on intermittent basis -20°C to +60°C (-4°F to 140°F) on intermittent basis 3°C to 35°C (37.4°F to 95°F)
Operating temperature 5 to 45°C (41°F to 113°F) 6 to 45°C (41°F to 113°F) 0°C to 50°C (32°F to 122°F)
Power 2 AA alkaline batteries 2 AA alkaline batteries 2 AA alkaline batteries
Battery Life Up to 1200 hrs Up to 1300 hrs Up to 450 hrs of continual use
Humidity Non-condensing 0-95% RH Non-condensing 0-95% RH Non-condensing 0-95% RH
Warm up time None None 60 Seconds
Approvals ISO 9001:2000, MDD 93/42/Annex II, ISO 13485:2003 None None

Additional information

Weight 1 kg
Model

AII-3000, Palm O2, Palm CO Analyzer

× Whatsapp Us