AII Palm O2 Remote Sensor Handheld O2 Analyzer
RM 0.00
Description
Handheld O2 Analyzer – Palm O2 Remote Sensor
For Oxygen Measurement in Welding and Scuba Diving
AII Palm O2 Remote Sensor Handheld O2 Analyzer , is a handheld oxygen analyzer that provide a very easy way to verify oxygen levels prior to welding or in scuba diving tanks.
Analytical Industries’ AII Palm O2 is a convenient way to check oxygen levels in welding gases. These cost-effective gas analyzers also measure and display the concentration of oxygen in compressed breathing air tanks intended for scuba diving, for personnel safety, O2 deficiency in confined spaces, as well as confirming the O2 levels prior to welding. These monitors use similar electrochemical galvanic fuel cell oxygen sensor that are extensively used to measure concentrations from 0% to 100% O2 in gas streams.
AII Palm O2 Remote Sensor Handheld O2 Analyzer Features:
- Easy user interface, one touch controls
- Simple to use, accurate reliable results
- One touch calibration, 100% O2 or air
- Long battery life, 13,000 hrs of use
- Advanced sensor technology
- State of the art electronics
Accessories
Palm 02D Adapter, Dome to Sensor
| Palm O2 | |
| Measurement range | 0-100% oxygen |
| Accuracy | < ±2% of FS range under constant conditions |
| Response time | T90 < 10 seconds |
| Sensitivity (LDL) | 0.50% |
| Linearity | ±1% under constant conditions |
| Sensor model | AII-11-75-PO2 AII-11-75-PO2-D (for diving) |
| Sensor life at 25°C (77°F) and 1 atmosphere | 32 months in air 5°C (77°F) and 1 atmosphere |
| Calibration interval | Prior to use and after 8 hours operation |
| Inlet pressure | Ambient or 0.34-2 barg (5-30 psig) for flow through connector |
| Flow rate (constant) | 0.2-10 Nl/min (0.4-20 SCFH) |
| Gas connections | 1×16 mm thread 1/4″ tube for remote sensors See accessories for additional connectors |
| Display | 3 digit LCD 2.8 x 1.6cm (1.1 x 0.625″); resolution 0.1 |
| Dimensions | 6.9 x 10.4 x 3.4cm (2.72″ x 4.1″ x 1.35″) |
| Weight | 196g (7oz) |
| Compensation | Temperature compensated |
| Alarms | User adjustable HI and LO alarms (AII-3000 M and MHC only) |
| Storage temperature | -20°C to +60°C (-4°F to 140°F) on intermittent basis |
| Operating temperature | 6 to 45°C (41°F to 113°F) |
| Power | 2 AA alkaline batteries |
| Battery Life | Up to 1300 hrs |
| Humidity | Non-condensing 0-95% RH |
| Warm up time | None |
| Approvals | None |
Additional information
| Weight | 1 kg |
|---|---|
| Model | Palm O2 Remote Sensor, Adapter Dome to Sensor |
