Description

Series 2000-SP Magnehelic® Differential Pressure Gages

Indicate Positive, Negative or Differential, Accurate within 2%

Series 2000-SP Magnehelic® Differential Pressure Gage has a bright red LED on the right of the scale showing when setpoint is reached. Field adjustable from gage face, unit operates on 12-24 VDC. Requires MP or HP style cover and bezel.

Specification:

• Service: Air and non-combustible, compatible gases. (Natural gas option available.)

• Wetted Materials: Consult factory.
• Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
• Accuracy: ±2% of full scale (±3% on – 0, -100 Pa, -125 Pa, 10MM and ±4% on – 00,-60 Pa, -6MM ranges), throughout range at 70°F (21.1°C).
• Pressure Limits: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar).
• Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only.
• Temperature Limits: 20 to 140°F. (-6.67 to 60°C).
• Size: 4″ (101.6 mm) diameter dial face.
• Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
• Process Connections: 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back.
• Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g).
• Standard Accessories: Two 1/8″ NPT plugs for duplicate pressure taps, two 1/8″ pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories.)

Model & ordering