<\/p>\n
Important notes for installation:<\/h2>\n\n- Cables must be fitted through 1\/2″ NPT cable gland or ATEX\/IECEx conduit (not supplied with instrument).<\/li>\n
- Make sure after cabling to close tight cover and cable gland, in order to maintain IP66 rating.<\/li>\n
- Open cover only after de-energizing instrument.
\n<\/b><\/li>\n- Attention:<\/b> Check local safety rules and warnings on unit and manual for a correct use of the instrument in hazardous areas.<\/li>\n<\/ul>\n
<\/p>\n
Product Applications<\/h2>\n\n- Hazardous area pressure switch<\/li>\n
- Air filter and ventilator monitoring<\/li>\n
- Ventilation duct monitoring<\/li>\n
- Industrial cooling circuits<\/li>\n
- Fan heater overheating protection<\/li>\n
- Fire-protection damper control<\/li>\n
- Heat exchanger frost protection<\/li>\n<\/ul>\n
<\/p>\n\nFeatures<\/h1>\n\n- Flameproof enclosure with optional glass window and aluminum housing protects the device in hazardous areas while giving local visibility to set point status<\/li>\n
- Increased response time at low pressures with LD port configuration<\/li>\n<\/ul>\n<\/section>\n
<\/p>\n\nSpecifications<\/h1>\n\n- Service: Air and non-combustible, compatible gases.<\/li>\n
- Wetted Materials: Diaphragm material: Silicone; Housing material: Switch body: PA 6.6 and POM; Cover: Polystyrene; Brass or SS depending on pressure connections chosen.<\/li>\n
- Temperature Limits: Process and ambient temperature from -4 to 185\u00b0F (-20 to 85\u00b0C) (Note:<\/b> Product temperature limits differ from case).<\/li>\n
- Pressure Limits: See pressure limit chart.<\/li>\n
- Switch Type: SPDT.<\/li>\n
- Electrical Rating: Standard: Max. 1.5 A @ 250 VAC, max. switching rate: 6 cycles\/min.<\/li>\n
- Set Point Adjustment: Hand knob on pressure switch inside case. (De-energize before opening case).<\/li>\n
- Mounting Orientation: Vertically, with pressure connections pointing downwards.<\/li>\n
- Mechanical Working Life: Over 106<\/sup><\/var> switching operations.<\/li>\n
- Enclosure Rating: IP66.<\/li>\n
- Housing Material: Aluminum.<\/li>\n
- Finishing: Texture epoxy coat RAL7015.<\/li>\n
- Process Connections: 1\/8″ NPT female brass (SS optional).<\/li>\n
- Electrical Connections: Two 1\/2″ NPT female. Cable gland not included.<\/li>\n
- Weight: 10.4 lb (4.7 kg).<\/li>\n
- ATEX Certificate:<\/li>\n
- INERIS 21ATEX0033X.<\/li>\n
- IECEx Certificate:<\/li>\n
- IECEx INE 21.0064X.<\/li>\n
- Agency Approvals:<\/li>\n
- ATEX Compliant:
![\"CE\"](\"https:\/\/www.dwyer-inst.com\/images\/addtl\/CE_17x12.png\")
0080 ![\"EX\"](\"https:\/\/www.dwyer-inst.com\/images\/addtl\/ATEX_13x12.png\")
II 2G Ex db IIC T5, T6 Gb -60\u00b0C \u2264Ta \u2264+50\u00b0C (T6) -60\u00b0C \u2264Ta \u2264+60\u00b0C (T5) II 2D Ex tb IIIC T75 \u00b0C Db;
\nIECEx Compliant: Ex db IIC T5, T6 Gb -60\u00b0C \u2264Ta \u2264+50\u00b0C (T6) -60\u00b0C \u2264Ta \u2264+60\u00b0C (T5) Ex tb IIIC T75\u00b0C Db.<\/li>\n<\/ul>\n<\/section>\n <\/p>\n
<\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
\n<\/b><\/li>\n
<\/p>\n
Product Applications<\/h2>\n\n- Hazardous area pressure switch<\/li>\n
- Air filter and ventilator monitoring<\/li>\n
- Ventilation duct monitoring<\/li>\n
- Industrial cooling circuits<\/li>\n
- Fan heater overheating protection<\/li>\n
- Fire-protection damper control<\/li>\n
- Heat exchanger frost protection<\/li>\n<\/ul>\n
<\/p>\n\nFeatures<\/h1>\n\n- Flameproof enclosure with optional glass window and aluminum housing protects the device in hazardous areas while giving local visibility to set point status<\/li>\n
- Increased response time at low pressures with LD port configuration<\/li>\n<\/ul>\n<\/section>\n
<\/p>\n\nSpecifications<\/h1>\n\n- Service: Air and non-combustible, compatible gases.<\/li>\n
- Wetted Materials: Diaphragm material: Silicone; Housing material: Switch body: PA 6.6 and POM; Cover: Polystyrene; Brass or SS depending on pressure connections chosen.<\/li>\n
- Temperature Limits: Process and ambient temperature from -4 to 185\u00b0F (-20 to 85\u00b0C) (Note:<\/b> Product temperature limits differ from case).<\/li>\n
- Pressure Limits: See pressure limit chart.<\/li>\n
- Switch Type: SPDT.<\/li>\n
- Electrical Rating: Standard: Max. 1.5 A @ 250 VAC, max. switching rate: 6 cycles\/min.<\/li>\n
- Set Point Adjustment: Hand knob on pressure switch inside case. (De-energize before opening case).<\/li>\n
- Mounting Orientation: Vertically, with pressure connections pointing downwards.<\/li>\n
- Mechanical Working Life: Over 106<\/sup><\/var> switching operations.<\/li>\n
- Enclosure Rating: IP66.<\/li>\n
- Housing Material: Aluminum.<\/li>\n
- Finishing: Texture epoxy coat RAL7015.<\/li>\n
- Process Connections: 1\/8″ NPT female brass (SS optional).<\/li>\n
- Electrical Connections: Two 1\/2″ NPT female. Cable gland not included.<\/li>\n
- Weight: 10.4 lb (4.7 kg).<\/li>\n
- ATEX Certificate:<\/li>\n
- INERIS 21ATEX0033X.<\/li>\n
- IECEx Certificate:<\/li>\n
- IECEx INE 21.0064X.<\/li>\n
- Agency Approvals:<\/li>\n
- ATEX Compliant: 0080 II 2G Ex db IIC T5, T6 Gb -60\u00b0C \u2264Ta \u2264+50\u00b0C (T6) -60\u00b0C \u2264Ta \u2264+60\u00b0C (T5) II 2D Ex tb IIIC T75 \u00b0C Db;
\nIECEx Compliant: Ex db IIC T5, T6 Gb -60\u00b0C \u2264Ta \u2264+50\u00b0C (T6) -60\u00b0C \u2264Ta \u2264+60\u00b0C (T5) Ex tb IIIC T75\u00b0C Db.<\/li>\n<\/ul>\n<\/section>\n <\/p>\n
<\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
<\/p>\n <\/p>\n <\/p>\n <\/p>\n <\/p>\n","protected":false},"excerpt":{"rendered":"Features<\/h1>\n
\n
Specifications<\/h1>\n
\n
0080 II 2G Ex db IIC T5, T6 Gb -60\u00b0C \u2264Ta \u2264+50\u00b0C (T6) -60\u00b0C \u2264Ta \u2264+60\u00b0C (T5) II 2D Ex tb IIIC T75 \u00b0C Db;
\nIECEx Compliant: Ex db IIC T5, T6 Gb -60\u00b0C \u2264Ta \u2264+50\u00b0C (T6) -60\u00b0C \u2264Ta \u2264+60\u00b0C (T5) Ex tb IIIC T75\u00b0C Db.<\/li>\n<\/ul>\n<\/section>\n