DRASTAR DRA500 (Springless) UHP Springless Single Stage Reducing Regulators

RM 0.00

PRE-ORDER: 4-6 WORKING WEEKS

Description

DRA500 (Springless)

UHP Springless Single Stage Reducing Regulators

 

UHP Springless Tied Diaphragm Low Pressure(1/4” or 1/2”)

The DRA500 series is a springless , VCR type Pressure Reducing Regulator developed to be suitable for gas cabinets for ultra-high purity semiconductor manufacturing, special gas lines, valve manifold boxes, and other laboratories.

★ High flow product, 1/4″ Cv= 0.06 or 0.5, 1/2″ Cv=0.5.
★ The body uses STS 316L or 316L VAR (double melt) and electrolytic polishing (EP) treatment, so it is more suitable for corrosive gas environment.
★ Springless type: The “Wave Spring (Drastar Patent #10-1191514)” used instead of the existing spring suppresses the generation of foreign substances that may occur in the spring itself due to fatigue from long-term use, so ultra-high purity and cleaning are required. suitable for the field.
★ As a Tied-diaphragm type, the DRA500 series provides the highest level of safety by preventing leakage from any foreign substances on the valve seat and preventing diaphragm rupture due to toxic, ignitable, and highly corrosive gases.
★ Metal-to-metal sealing on the diaphragm and body improves leak prevention.
★ Surface treatment: Ultra-precise treatment with EP 10Ra or 5Ra microinch (0.25 or 0.13 micrometer) grade.
★ Inlet pressure is 3500 psig (241 bar), 2200 psig (151 bar) or 600 psig (42 bar) and outlet pressure is 5 psig (0.3 bar) up to 150 psig (10.3 bar) depending on model.
★ All processes such as welding, assembly, testing and cleaning are performed in 100-class and 10-class clean rooms.

★ DRA500 series offers high flow with Cv = 0.5 at 1/4″ and Cv=0.5 at 1/2”.
★ Inboard Leak Rate to <1 x 10-9 atm cc/sec Helium available.
★ Body is made of 316L or VAR (double melt) Stainless Steel with Electropolish to be applicable for corrosive gases.
★ Diaphragm: STS 316L or Hastelloy.
★ Spring-less type: “wave spring” (DRASTAR patent #10-1191514) used for conventional spring keeps down possible particle generation by the spring itself due to fatigue from long-time use and so it is suitable for applications where ultra high purity and cleaning is needed.
★ Metal to metal diaphragm to body sealing for high leak integrity,
★ E.P. up to 10Ra or 5Ra microinch(0.25 or 0.13 micrometer) to prevent from particle generation.
★ As tied-diaphragm type, DRA500 series offers supreme safety by preventing leaks notwithstanding any particle generation on the valve sheet and protecting the rupture of diaphragm from toxic, pyrophoric, or corrosive gases.
★ Inlet pressures are 3500psig(241bar), 2200psig(151bar) or 600psig(42bar) with outlet pressures from 5psig (0.3bar) up to 150psig (10.3bar).
★ Design proof pressure: 150% of maximum rated
★ All works of welding, assembly, test, and cleaning are done in 100-class& 10-class clean room.
★ Decaying Inlet Characteristic: 1.2 psig /100 psig.

※ It is more convenient to use by applying our push and lock control knob (our patent # 10-1370537), which completely solves the phenomenon of minute fluctuations in the initial pressure setting value due to gas line or external micro-vibration during use. . Pressing the adjustment knob (lock) completely prevents the pressure setting value from changing, and pulling the knob forward (unlocking) allows you to freely set the desired pressure again.

 

Ordering Information:

DRA500 D 025 H S
BASIS
SERIES
NUMBER
BODY
MATERIAL
OUTLET
PRESSURE
RANGE
DIAPHRAGM
MATERIAL
MAX.
INLET
PRESSURE
DRA500 C = 316L E.P(P.E.P) —— 5Ra

D = 316L VAR E.P ——- 10Ra

E = 316L VAR E.P(P.E.P) – 5Ra

 

025 = 1-25psi
(.1-1.7bar)

050 = 1-50psi
(.1-3.5bar)

100 = 1-100psi
(.1-7bar)

130 = 1-130psi
(.2-9bar)

150 = 1-150psi
(.2-10.3bar) 

S = STS 316L

H = Hastelloy-C

H = 3500psi (241bar)

S = 2200psi (151bar)

M = 1000psi (70bar)

L = 600psi(42bar)

 

P S 4MS G0S
SEAT
MATERIAL
FLOW
CAPACITY
INLET
OUTLET
PORTS SIZE
Type “A” ± 1.0mm
GAUGE
PORTS
OPTIONS
Gauge Ports
P = PCTFE
(600 & 1000psi)

T = Teflon
(600psi)

V = Vespel
(2200psi or 3500psi)

S = Cv 0.06

1/4″ Standard

O = Cv 0.5

1/4″ Optional

S = Cv 0.5

3/8″ Standard

S = Cv 0.5

1/2″ Standard

4HP = 1/4″ H.P.I.C

4MS = 1/4″ Male Swivel —- 94mm
4FS = 1/4″ Female Swivel — 94mm
4FL = 1/4″ Female Swivel — 114mm
4ML = 1/4″ Male Swivel —- 114mm

2MS = 1/2″ Male Swivel —- 142mm
2FS = 1/2″ Female Swivel — 142mm
2ML = 1/2″ Male Swivel —- 000mm
2FL = 1/2″ Female Swivel — 000mm

4IMF = 1/4″ In Male
Out Female ——– 94mm
4IFM = 1/4″ In Female
Out Male ———- 94mm

2IMF = 1/2″ In Male
Out Female ——– 142mm
2IFM = 1/2″ In Female
Out Male ———- 142mm
2IMFL = 1/2″ In Male
Out Female ——– 000mm
2IFML = 1/2″ In Female
Out Male ———- 000mm

4TS = 1/4″ Tube Stubs —- 94mm
2TS = 1/2″ Tube Stubs —- 120mm

G0S = None ————– 0

G1S = 1/4″ H.P.I.C —— 1

G2S = 1/4″ H.P.I.C —— 2

G2B = 1/4″ H.P.I.C —— 2

M1S = 1/4″ Male Swivel — 1

M2S = 1/4″ Male Swivel — 2

M2B = 1/4″ Male Swivel — 2

F1S = 1/4″ Femle Swivel — 1

F2S = 1/4″ Femle Swivel — 2

F2B = 1/4″ Femle Swivel — 2

 

Specification:

 

Ports  DRA500-D100H-xxx-4MS-GxS   1/4″  Male
DRA500-D100H-xxx-4FS-GxS   1/4″  Female
DRA500-D100H-xxx-2MS-GxS   1/2″  Male
DRA500-D100H-xxx-2FS-GxS   1/2″  Female
 Design Pressure  150% maximun rated
 Leak Rate
Certification
 < 1 x 10 -9 atm cc/sec Helium, per ASTM E449
 Body Materials  DRA500-C100H-xxx-xxS-GxS 316L E.P(P.E.P) ————- 5Ra
DRA500-D100H-xxx-xxS-GxS 316L VAR E.P ————— 10Ra
DRA500-E100H-xxx-xxS-GxS 316L VAR E.P(P.E.P) ——— 5Ra
 Bonnet Material  Nickel Plated Brass (Stainless steel 316L Optional)
 Diaphragm  DRA500-D100S-xxx-xxS-GxS  STS 316L
DRA500-D100H-xxx-xxS-GxS  Hastelloy-C
 Main Valve  DRA500-D100H-xxx-xxS-GxS  Hastelloy-C  Standard
 Valve Spring  –
 Valve Seat  DRA500-D100H-xPx-xxH-GxS  PCTFE
DRA500-D100H-xTx-xxH-GxS  Teflon
DRA500-D100H-xVx-xxH-GxS  Vespel
 Inlet Pressure
Ranges
 DRA500-D100H-Hxx-xxS-GxS   3500psi(241bar)
DRA500-D100H-Sxx-xxS-GxS   2200psi(151bar)
DRA500-D100H-Mxx-xxS-GxS  1000psi(70bar)
DRA500-D100H-Lxx-xxS-GxS   600psi(42bar)
 Outlet Pressure
Ranges
 DRA500-D025H-xxS-xMS-GxS   25psi(1.7bar)
DRA500-D050H-xxS-xMS-GxS   50psi(3.4bar)
DRA500-D100H-xxS-xMS-GxS   100psi(7bar)
DRA500-D130H-xxS-xMS-GxS   130psi(9bar)
DRA500-D150H-xxS-xMS-GxS   150psi(10.3bar)
 Operating
Temperature
 PCTFE -40°C ~ +70°C (-40°F ~ +165°F)
Teflon PFA -40°C ~ +70°C (-40°F ~ +165°F)
Vespel -40°C ~ +175°C (-40°F ~ +350°F)
 Flow Capacity  DRA500-D100H-xxxS-4MS-GxS   1/4″  Cv=0.06
DRA500-D100H-xxxO-4MS-GxS   1/4″  Cv=0.5
DRA500-D100H-xxxS-2MS-GxS   1/2″  Cv=0.5

 

 

Additional information

Weight 2 kg