DRASTAR DRA300 (Springless) UHP VCR Springless Single Stage Pressure Reducing Regulators

RM 0.00

PRE-ORDER: 4-6 WORKING WEEKS

 

Description

DRA300 (Springless)

UHP VCR Springless Single Stage Pressure Reducing Regulators

 

UHP Low Pressure VCR Type(1/4″ 3/8″ 1/2″ 3/4″)

DRA300 Series is an Springless tied-diaphragm type UHP low pressure reducing regulator with surface finishes to B.A. 25Ra, E.P. 10Ra, or E.P. 5Ra microinch and applicable for gas cabinet for semiconductor manufacturing, specialty gases, valve manifold boxes, and research labs, etc. Inlet pressures are 3000psig (210bar) or 600psig (42bar) and outlet pressures are from 5psig (0.3bar) up to 250psig (17bar).

★ Springless type VCR regulator: By adopting the “flat- wave-shaped ring spring” (DRASTAR patent #10-1191514) instead of conventional spring, particle generation by spring itself due to fatigue from long-time use can be kept down
★ To use more suitably for corrosive gas applications, 316L or 316L VIM+VAR (double melt) available as optional
★ Tied-diaphragm design for positive shut-off and protecting the rupture of diaphragm
★ Surfaces finishes to B.A. 25Ra, E.P. 10 Ra or E.P. 5 Ra microinch
★ Push and lock type handle (DRASTAR patent #10-1086199) mounted
★ Threadless type: enhanced particle prevention by adopting the locking-plate seal system (DRASTAR patent #10-0753280)
★ All works of welding, assembly, test and cleaning are performed in class 100 and class 10 clean-rooms
★ Design proof pressure: 150% of maximum rated
★ Applicable for Semiconductor manufacturing gas line, toxic gases, pyrophoric gases, and high corrosive gases

※ With DRASTAR’s patented (patent #1086199) “push and lock type handle”, you can operate it easily and stably; “locking” by pushing down the handle will prevent any slight change of pre-set pressure value, which could possibly be caused by any vibration from gas pipeline or ambient applications and the other way “unlocking” by pulling it back enables you to adjust the pressure value freely again.

 

Ordering Information:

DRA300 B 025 S H
BASIS
SERIES
NUMBER
BODY MATERIAL &
SURFACE FINISH
OUTLET
PRESSURE
RANGE
DIAPHRAGM
MATERIAL
MAX.
INLET
PRESSURE

DRA300

A = 316L B.A ————– 25Ra

B = 316L E.P ————– 10Ra

C = 316L E.P(P.E.P) ——- 5Ra

D = 316L VAR E.P ———- 10Ra

E = 316L VAR E.P(P.E.P)—- 5Ra

 

025 = 1-25psi (.1-1.7bar)
050 = 1-50psi (.1-3.5bar)
100 = 1-100psi (.1-7bar)
250 = 1-250psi (.2-17bar)

 

S = STS 316L

H = Hastelloy-C

H = 3000psi(210bar)

L = 600psi(42bar)

 

P S 4MS G0S
SEAT
MATERIAL
FLOW
CAPACITY
INLET
OUTLET
PORTS SIZE
Type “A” ± 1.0mm
GAUGE
PORTS
OPTIONS
Gauge Ports
P = PCTFE

T = Teflon

V = Vespel

S = Cv 0.06
1/4″ Standard

O = Cv 0.2
1/4″ Optional

S = Cv 0.2
3/8″ Standard

S = Cv 0.5
1/2″ Standard

O = Cv 1.0
1/2″ Optional

S = Cv 1.2
3/4″ Standard

4HP = 1/4″ H.P.I.C

4MS = 1/4″ Male Swivel —- 94mm
4FS = 1/4″ Female Swivel — 94mm
4FL = 1/4″ Female Swivel — 114mm
4ML = 1/4″ Male Swivel —- 114mm

8MS = 3/8″ Male Swivel —- 120mm
8FS = 3/8″ Female Swivel — 120mm

2MS = 1/2″ Male Swivel —- 140mm
2FS = 1/2″ Female Swivel — 140mm
2ML = 1/2″ Male Swivel —- 180mm
2FL = 1/2″ Female Swivel — 180mm

3MS = 3/4″ Male Swivel —- 160mm
3FS = 3/4″ Female Swivel — 160mm

4IMF = In 1/4″ Male
Out 1/4″ Female —– 94mm
4IFM = In 1/4″ Female
Out 1/4″ Male ——- 94mm

2IMF = In 1/2″ Male
Out 1/2″ Female —– 140mm
2IFM = In 1/2″ Female
Out 1/2″ Male ——- 140mm
2IMFL = In 1/2″ Male
Out 1/2″ Female —– 180mm
2IFML = In 1/2″ Female
Out 1/2″ Male ——- 180mm

4TS = 1/4″ Tube Stubs —- 94mm
8TS = 3/8″ Tube Stubs —- 94mm
2TS = 1/2″ Tube Stubs —- 120mm
3TS = 3/4″ Tube Stubs —- 160mm

G0S = None ————- 0

G1S = 1/4″ H.P.I.C ——- 1

G2S = 1/4″ H.P.I.C ——- 2

G2B = 1/4″ H.P.I.C ——- 2

M1S = 1/4″ Male Swivel — 1

M2S = 1/4″ Male Swivel — 2

M2B = 1/4″ Male Swivel — 2

F1S = 1/4″ Femle Swivel — 1

F2S = 1/4″ Femle Swivel — 2

F2B = 1/4″ Femle Swivel — 2

 

Specification:

Ports   DRA300-A100S-xxx-4MS-GxS   1/4″  Male
DRA300-A100S-xxx-4FS-GxS    1/4″  Female
DRA300-A100S-xxx-8MS-GxS   3/8″  Male
DRA300-A100S-xxx-8FS-GxS    3/8″  Female
DRA300-A100S-xxx-2MS-GxS   1/2″  Male
DRA300-A100S-xxx-2FS-GxS    1/2″  Female
DRA300-A100S-xxx-3MS-GxS   3/4″  Male
DRA300-A100S-xxx-3FS-GxS    3/4″  Female
 Design Pressure   150% maximum rated
 Leak Rate
Certification
  to 1 x 10 -9 atm cc/sec Helium available.
 Body Materials   DRA300-A100x-xxx-xxS-GxS 316L B.A —————— 25Ra
DRA300-B100x-xxx-xxS-GxS 316L E.P —————— 10Ra
DRA300-C100x-xxx-xxS-GxS 316L E.P(P.E.P) ————5Ra
DRA300-D100x-xxx-xxS-GxS 316L VAR E.P —————10Ra
DRA300-E100x-xxx-xxS-GxS 316L VAR(P.E.P) ———— 5Ra
 Bonnet Material   Nickel Plated Brass (Stainless steel 316L Optional)
 Diaphragm   DRA300-x100S-xxx-xxS-GxS  STS 316L
DRA300-x100H-xxx-xxS-GxS  Hastelloy-C22
 Main Valve   DRA300-A100S-xxx-xxS-GxS  Stainless steel 316L  Standard
DRA300-B100H-xxx-xxS-GxS  Hastelloy-C22  Optional
 Valve Spring
  Valve Seat   DRA300-B100S-xPx-xxS-GxS  PCTFE
DRA300-B100S-xTx-xxS-GxS  Teflon
DRA300-B100S-xVx-xxS-GxS  Vespel
 Inlet Pressure
Ranges
  DRA300-A100S-Hxx-xxS-GxS   3000psi(210bar)
DRA300-A100S-Lxx-xxS-GxS   600psi(42bar)
 Outlet Pressure
Ranges
  DRA300-x025x-xxS-xMS-GxS   25psi(1.7bar)
DRA300-x050x-xxS-xMS-GxS   50psi(3.4bar)
DRA300-x100x-xxS-xMS-GxS   100psi(7bar)
DRA300-x250x-xxS-xMS-GxS   250psi(17bar)
 Operating
Temperature
  PCTFE -40°C ~ +60°C (-40°F ~ +140°F)
Teflon -40°C ~ +70°C (-40°F ~ +165°F)
Vespel -40°C ~ +170°C (-40°F ~ +350°F)
 Flow Capacity   DRA300-x100x-xxS-4MS-GxS   1/4″  Cv=0.06
DRA300-x100x-xxO-4MS-GxS   1/4″  Cv=0.2
DRA300-x100x-xxS-8MS-GxS   3/8″  Cv=0.2
DRA300-x100x-xxS-2MS-GxS   1/2″  Cv=0.5
DRA300-x100x-xxO-2MS-GxS   1/2″  Cv=1.2
DRA300-x100x-xxS-3MS-GxS   3/4″  Cv=1.2

 

 

 

 

 

Additional information

Weight 2 kg