DRASTAR DR60 Series Single-stage Pressure Reducing Regulator 1/4” NPT

RM 0.00

PRE-ORDER: 4-6 WORKING WEEKS

Description

DR60 Series

Single Stage Reducing Regulators

 

Single Stage Low Pressure Regulators(NPT 1/4″)

DR60 Series is a 1/4” NPT type single-stage pressure reducing regulator being widely used for general plumbing and industrial gases. Mode of nickel plated brass for body and stainless steel or brass for internal parts, Teflon valve seat, and diaphragm of special rubber, DR60 series an economical model with durability and safety as well.

◈ 1/4” NPT type regulator
◈ Suitable for the general plumbing and industrial control fields
◈ Inlet pressures are 3000psi(210bar) or 600psi(42bar) and outlet pressures are 25psig (1.7bar) 50psig(3.5bar), 100psig(7bar), 200psig(14bar)
◈ Design proof pressure: 150% of maximum rated

[DRASTAR Regulators are Oil-free]
※ DRASTAR’s all pressure regulators are assembled, cleaned, inspected, and packed in clean-room equipped with clean bench, helium detector, particle counter, ultrasonic cleaner, ultrapure water system, vacuum packaging machine, etc. through oxygen cleaning procedure in compliance with process and regulations indicated in CGA 4.1. and or ASTM G-93 and are free of any grease or oils.

※ Caution: Filtering (gas 7㎛ ~ 15㎛, water 15㎛ ~ 80㎛) is a MUST to use in the general gas application other than high purity gases. Otherwise, it may cause a failure to the regulators. It is strongly recommended to install filter for extension of life span and saving the maintenance expense

 

Ordering Information:

DR60 A 025 1
BASIC
SERIES NUMBER
MAX. INLET
PRESSURE
OUTLET
PRESSURE RANGES
INLET
OUTLET
PORTS SIZE
DR60 Series A = 3000psi(210bar)

B = 600psi(42bar)

025 = 1-25psig  (.1-1.7bar)050 = 1-50psig  (.1-3.5bar)

100 = 1-100psig  (.1-7bar)

200 = 1-200psig  (.2-14bar)

1 = 3-Ports

2 = 4-Ports

 

Specification:

Ports   1/4″ Female NPT
DR60-A100-1   3-Ports
DR60-A100-2   4-Ports
 Design Pressure  150% maximun reted
 Leak Rate  Certification   to 2 x 10-6 atm cc/sec Helium available.
 Body Materials   Nickel Plated Forged Brass
 Bonnet Material   Zinc(Zn) Casting Nickel Plated
 Diaphragm   Particular of Synthetic Rubber
 Main Valve   Stainless steel
 Valve Spring   Stainless steel
 Valve Seat   Teflon
 Inlet Pressure  Ranges   DR60-A100-2   3000psi (210bar)
DR60-B100-2   600psi (42bar)
 Outlet Pressure  Ranges   DR60-A025-2   25psi (1.7bar)
DR60-A050-2   50psi (3.4bar)
DR60-A100-2   100psi (7bar)
DR60-A200-2   200psi (14bar)
 Operating  Temperature   -40°C ~ +70°C (-40°F ~ +165°F)   Standard
 Flow Capacity   Cv = 0.2 Standard
 Optional   Inlet CGA etc..
 Weight  1.0kg

 

Additional information

Weight 1 kg