DRASTAR DR110 Series Gas and D/I Water High Flow Regulator (NPT 1/2”, 3/4”, 1”)

RM 0.00

PRE-ORDER: 4-6 WORKING WEEKS

SKU: DR110 Categories: , , , , , Tags: , , , ,

Description

DR110 Series

Gas and D/I Water High Flow Regulators (NPT 1/2”, 3/4”, 1”)

 

DR110 Series having Cv5.0 is a pressure reducing regulator ideally designed to use for high flow application in the field of general industrial gas pipeline, air pipeline, waster or DI water lines. 3/4” and 1” NPT and BSP connections are available.

◈ 3/4” and 1” NPT or BSP port of connection available
◈ Inlet, outlet gauge(s) installed as standard
◈ Drop-preventing function is built in
◈ Inlet pressures are 250bar(3600psi) or 42bar(600psi) and outlet pressures are 2bar(30psig), 4bar(60psi), 7bar(100psig), 10bar(145psig), 20bar(290psig)
◈ Panel mounting and wall mounting bracket available as option
◈ Design proof pressure: 150% of maximum rated
◈ Suitable for D/I water, industrial gases, air or water line industrial control

[DRASTAR Regulators are Oil-free]
※ DRASTAR’s all pressure regulators are assembled, cleaned, inspected, and packed in clean-room equipped with clean bench, helium detector, particle counter, ultrasonic cleaner, ultrapure water system, vacuum packaging machine, etc. through oxygen cleaning procedure in compliance with process and regulations indicated in CGA 4.1. and or ASTM G-93 and are free of any grease or oils.

※ Caution: Filtering (gas 7㎛ ~ 15㎛, water 15㎛ ~ 80㎛) is a MUST to use in the general gas application other than high purity gases. Otherwise, it may cause a failure to the regulators. It is strongly recommended to install filter for extension of life span and saving the maintenance expense.

 

Ordering Information:

 

DR110 – S L – 002 C – N 2 F2 – H1

 
BASIS
SERIES
NUMBER		 BODY
MATERIAL		 INLET
PRESSURE		 CONTROLLED
PRESSURE
RANGE		 IN & OUT
PORTS		 IN & OUT
PORTS TYPE		 IN & OUT
PORTS SIZE		 IN & OUT
PORTS TYPE		 HIGH
TEMPE-
RATURE
DR110 =
Bolt ControlDR115 =
Knob Control

Cv = 5.0
Standard

S = STS 316L
(250bar)B = Brass
(100bar)		 L = 42bar
(600psi)S = 150bar
(2200psi)

H = 250bar
(3600psi)

U = 350bar
(5000psi)

 002 = 2bar(29psi)
004 = 4bar(58psi)
007 = 7bar(100psi)
010 = 10bar(145psi)
020 = 20bar(290psi)
040 = 40bar(580psi)
070 = 70bar(1000psi)
100=100bar(1450psi)
150=150bar(2175psi)		 C = 4-ports

M = 4-ports

 N = NPT

B = BSP

1 = 1/2″

2 = 3/4″

3 = 1″

 F2 = 20k
FlangeF3 = 30k
Flange

T = Tube

Flange –
304 or 316

Tube –
304 or 316L

Optional

H1 = 120°C

H2 = 250°C

H3 = 320°C

Optional

 

Specification:

 

Ports  DR110-SL-000C-N2  NPT 3/4″
DR110-SL-000C-N3  NPT 1″DR110-SL-000C-B2  BSP 3/4″
DR110-SL-000C-B3  BSP 1″

DR110-SL-000C-N2 F2    1/2″ 20k Flange

DR110-SL-000C-N2 F2    3/4″ 20k Flange

DR110-SL-000C-N3 F2    1″ 20k Flange

DR110-SL-000C-N2 T2    1/2″ Tube

DR110-SL-000C-N2 T2    3/4″ Tube

DR110-SL-000C-N3 T3    1″ Tube
 Design Proof Pressure  150% maximun rated
 Leak Rate  Certification  to 2 x 10-5 atm cc/sec Helium available.
 Body Materials  Stainless steel 316L
 Body Flange  Stainless steel 316L
 Bonnet Material  AL2024
 Diaphragm  Teflon
 Main Valve  Stainless steel 316L
 Valve Spring  Stainless steel 316L
 Valve Seat  Teflon
 Inlet Pressure  Ranges  DR110-S L -002C-N3  42bar(600psi)
DR110-B H -002C-N3  100bar(1450psi)
DR110-S H -002C-N3  250bar(3600psi)
 Outlet Pressure  Ranges  DR110-SL-002C-N3  2bar(29psi)
DR110-SL-004C-N3  4bar(58psi)
DR110-SL-007C-N3  7bar(100psi)
DR110-SL-010C-N3  10bar(145psi)
DR110-SL-020C-N3  20bar(290psi)
 Operating  Temperature  DR110-SL-020C-N3 -40°C ~ +70°C (-40°F ~ +165°F)  Standard
DR110-SL-020C-N3-H1   +120°C   Optional
DR110-SL-020C-N3-H2   +250°C   Optional
DR110-SL-020C-N3-H3   +320°C   Optional
 Flow Capacity  Cv = 5.0 Standard
 Optional  ..

 
 Weight  6.5kg

 

Additional information

Weight 7 kg

Related products