DRASTAR 092 Series Single Stage High-flow Low Pressure Regulators (NPT 1/2″)

RM 0.00

PRE-ORDER: 4-6 WORKING WEEKS

 

Description

092 Series

Single Stage Pressure Reducing Regulators

 

Single Stage High-flow Low Pressure Regulators(NPT 1/2″)

092 Series is a 1/2” NPT type single-stage pressure reducing regulator specially designed to use for high-flow low-pressure applications. Made of stainless steel for body and all internal parts, 092 series has wide range of applications.

With DRASTAR’s patented (patent #1086199) “push and lock type handle”, you can operate it easily and stably; “locking” by pushing down the handle will prevent any slight change of pre-set pressure value, which could possibly be caused by any vibration from gas pipeline or ambient applications and the other way “unlocking” by pulling it back enables you to adjust the pressure value freely again.

◈ 1/2″ NPT type high flow low pressure regulator
◈ Inlet pressures are 3000psi(210bar) or 600psi(42bar) and outlet pressures are 25psig (1.7 bar), 50psig(3.5bar), 100psig(7bar), 250psig(17bar), 500psig(35bar)
◈ Panel mounting nut or wall mounting bracket available as option
◈ W092-0000x-1S or W092-0500x-1S: W model is only for Liquid or Water
◈ Design proof pressure: 150% of maximum rated
◈ Applicable for general gas line, bulk gas line, research labs, specialty gases for analytical application, high purity gases, mixing gases, and corrosive gases as well as liquids.

[DRASTAR Regulators are Oil-free]
※ DRASTAR’s all pressure regulators are assembled, cleaned, inspected, and packed in clean-room equipped with clean bench, helium detector, particle counter, ultrasonic cleaner, ultrapure water system, vacuum packaging machine, etc. through oxygen cleaning procedure in compliance with process and regulations indicated in CGA 4.1. and or ASTM G-93 and are free of any grease or oils.

※Caution: Filtering (gas 7㎛ ~ 15㎛, water 15㎛ ~ 80㎛) is a MUST to use in the general gas application other than high purity gases. Otherwise, it may cause a failure to the regulators. It is strongly recommended to install filter for extension of life span and saving the maintenance expense.

 

Ordering Information:

 

(W) 092 0025 L 1S H 5 V H1
BASIS
SERIES
NUMBER
OUTLET
PRESSURE
RANGE
PORT
TYPE
FLOW
CAPACITY
DIAPHRAGM
MATERIAL
INLET
PRESSURE
SELF
VENTING
HIGH
TEMPE-
RATURE
Standard
Inlet Pressure
3000psig
(210bar)Body :
STS 316L
OnlyM=Monel400

D51 = STS
Duplex F51

H =
Hastelloy C 276

0025 = 25psi
(1.7bar)0050 = 50psi
(3.5bar)

0100 = 100psi
(7bar)

0200 = 200psi
(14bar)

0350 = 350psi
(24bar)

0500 = 500psi
(34bar)

A = 2-Ports

L = 3-Ports

C = 4-Ports

R = 3-Ports

M = 4-Ports

1 = 1/2″
Female NPTS = Cv 1.0
Standard
STS 316L Standard

H =
Hastelloy-C

Optional

5 = Inlet
600psi(42bar)Optional
V = Self-
VentingOptional
H1 = 120°C

H2 = 250°C

H3 = 320°C

Optional

 

Specification:

 

 Ports  1/2″ Female NPT
092-0000A-1S   2-Ports
092-0000L-1S   3-Ports
092-0000C-1S   4-Ports
 Design Pressure  150% maximun rated
 Leak Rate  Certification  to 2 x 10 -8 atm cc/sec Helium available.
 Body Materials  092-0100L-1S Stainless steel 316L Standard
092M-0100L-1S Monel 400
092H-0100L-1S Hastelloy C 276
092-D51-0100L-1S Duplex F51 Stainless steel
 Bonnet Material  Nickel Plated Brass (092S / Stainless steel 316L Optional)
 Diaphragm  092-0025x-1S     Stainless steel 316L
092-0025x-1SH   Hastelloy-C Optional
 Main Valve  Stainless steel 316L
 Valve Spring  Stainless steel 316L
 Valve Seat  Teflon (Kel-F, Polyimide, etc.. Optional)
 Inlet Pressure  Ranges  092-0000x-1S     3000psi(210bar)
092-0000x-1S-5  600psi(42bar)
 Outlet Pressure  Ranges  092-0025x-1S   25psi (1.7bar)
092-0050x-1S   50psi (3.4bar)
092-0100x-1S   100psi (7bar)
092-0200x-1S   200psi (17bar
092-0350x-1S   350psi (24bar
W092-0500x-1S   500psi (35bar) (500psi W model Only)
 Operating  Temperature  -40°C ~ +70°C (-40°F ~ +165°F)   Standard
092-0000x-xx-H1 +120°C   Optional
092-0000x-xx-H2 +250°C   Optional
092-0000x-xx-H3 +320°C   Optional
+400°C ~ +540°C (+750°F ~ +1000°F)   Optional
 Flow Capacity  Cv=1.0   Standard
 Optional  Inlet CGA, Inlet Outlet Gauge etc..
 Weight  1.7kg

 

 

 

 

Additional information

Weight 2 kg